The kit is designed to enable easy connection of the fuseholder to the battery for a multi-accessory installation, one cable off the battery split into 4

A master 25 amp fuse and high quality splash proof fuseholder protect the wiring to the input side of the 4 way fuseholder

4 standard blade fuses are supplied for the fusebox (2x10, 1x7.5, 1x5  amp) 

Each circuit of the 4 way split is capable of running a maximum of 15 amps. The total current that can be pulled through the fusebox as a whole is governed by the master 25 amp fuse

Under normal operating conditions an installation would not have all the accessories switched on at the same time and so if all the fuses added together exceeded that of the 25 amp master fuse then it does not mean that it will blow

4 x 2.5mm spade terminals are provided for the connections to the 4 blades of the fusebox, an 8mm ring terminal for the battery and a butt splice for connecting the master fuseholder to the main cable

Suitable for Cars, Caravans, Boats, etc where multiple accessories are to be run and need to be fused

The main cable will allow for the 4 way fusebox to be sited 1.3m away from the battery when the master inline fuseholder has being connected to it

This can be reduced by cutting the cable if neccessary to suit your application